Wire ball is an indispensable cleaning tool in our kitchen, it consists of many small steel wire, very hard and not easy to deform, can help us clean some stubborn stains. However,karesponge over time, a lot of grease and stains can accumulate inside the steel wire ball, making it dirty and sticky. Many people may choose to throw away such a wire ball, but this is actually very wasteful. As long as we can clean them, wire balls can still continue to be used for a long time. Today, I am going to share with you a tip to clean wire balls and easily bring them back to their original clean state. Let's learn about it together!

Usually, we use wire balls for cleaning when we burn pots and pans, clean the bottom of pots and pans, or deal with heavily oiled areas. Due to the strong friction of the steel wool ball, it can easily wipe away some stubborn stains. However, after scrubbing the oil stains, the steel wire ball will become very dirty. In fact, it is very simple to clean the steel wire ball. First, we need a pair of scissors, insert the scissors through the middle of the steel wire ball, and then open the scissors slightly so that the steel wire ball is firmly fixed in the front of the scissors.

Next, we will turn the gas stove to the lowest possible heat, and put the wire ball just fixed with scissors on the fire to roast. During the roasting process, we have to keep turning the steel wire ball to ensure that each side of it can be evenly heated. Bake for a period of time, we will hear the wire ball squeaking sound, this is because the wire ball inside the grease melted by heat. The high temperature also destroys the bacteria hidden inside the steel ball. During the roasting process, we should be careful not to get too close to the fire, so as not to scorch the wire ball or burn yourself.

After about a minute of roasting, when the grease inside the balls has largely melted, we can place the balls in a container and pour in enough boiling water to completely submerge the balls in the water. Next, we add a little bit of edible soda to the water. The strong alkalinity of cooking soda has a very good cleaning effect and can completely remove the stains on the steel wool ball. Then, we use a stick to gently stir the ball so that the stains inside are better cleaned out. In this way, let the wire ball soak in the water for some time.

After about ten minutes, when the water is no longer hot, we briefly rub the ball with our hands to get some of the stains off. Finally, we rinse the ball under running water a couple of times to get rid of any residue. In this way, our wire ball is cleaned and restored to its original state of cleanliness. This wire ball can continue to use for a period of time, and also save the cost of buying new wire ball.

Through this little trick, we can easily clean the steel wire ball, make it back to the original clean state. This will not only extend the life of the steel ball, but also save the cost of buying new steel balls. I hope this tip is helpful to you!

Related articles:

How to Make Homemade Dishwashing metal sponge with Wire Balls and B...

Waste steel metal sponge do not throw away, put it in the bathroom ...

How to use steel sponge? This is simply too practical after treatment