What is an easy job to make precise enough alignment? Either it is pointing at close or long distance, it should be the best job for users to operate a high brightness 532nm green laser line generator. Owing to the use of 532nm green DPSS laser, standing in the middle part of all visible optical spectrum, it is projecting the most visible and the brightest green laser light. On the basis of its low laser beam divergence and special Tem00 laser beam mode, only after its easy mounting onto any other industrial device or equipment, this 532nm green laser module is able to make high speed and long lasting green reference line projection onto a lot of working surfaces effectively.
This 532nm green laser line generator is the easiest operating line measuring tool. After easy connects with 5V, 9V 1000mA AC/DC adapter, and accepting wide range electric current of 100V to 240V, it is applying for various working environments. When it gets wide range output power of 5mW to 100mW, owing to its sensitive color green laser light from a middle wavelength of 532nm green DPSS laser system, this green laser module is projecting highly visible green laser beam at several miles far away. When it makes constant line alignment within daily operating time of 8 to 10 hours, after leaving enough time and space for tube cooling down, it achieves high level of laser light cycling use and highly clear line generation within the maximum work distance of 25 meters.

In those of industrial and high tech precise line positioning work fields, after basic measurement and experiment of technical data of line length, line fineness and work distance, this 532nm green laser line generator applies a qualified glass coated lens within wide fan angles of 10 to 110 degrees. It is projecting highly straight and fine green reference line within 0. 5 meter to 6 meters. When it gets the lowest laser beam divergence of less than 1mard and special TME00 laser beam mode, it is working well with extremely clear and fine green line projection in long lasting use.
According to the use of electric wires for both 532nm green laser line generator and DC power supply, within freely installed distance of 3 meters, it is easy to be mounted onto any other industrial device or equipment. It makes noncontact and no barrier line indication onto any vertical or horizontal surface. For the most important of all, owing to its special use of adjustable focus optic lens and immediate green laser light focusing, this alignment laser gets highly focused laser light, and increasing accuracy and brightness line alignment at great distance. It always brings users no manual labor force and low cost line generation for all raw materials processing works effectively.