What is the best solution for users to make highly clear dot measurement? It is always processing at various work distances, including those of high lighting occasion, it is not an easy job for users to only adopt a simple red laser pointer, but adopting a high brightness device, such as a 635nm red laser diode module. It projects high purity and high brightness red laser light directly from a 635nm red laser diode. On condition that it gets constant power source supply and easy mounting onto those of industrial machine or device, it just assures good direction, long lasting and low price dot alignment onto all working surfaces constantly.
This 635nm red laser diode module is always working for quite long time. It is applying an import 635nm red laser diode as beam emitting source. Not limited for temporary dot positioning works, it makes good use of a metal heat sink cooling system, thus achieves at least 40% improvement of laser beam stability in continuous use. Available with wide range output power of 5mW to 100mW, besides its projection of highly visible red laser beam at several miles far away, besides the use of highly clear red dot emission at close distance, high power red dot laser alignment up to 30mW to 100mW also makes good job for highly clear dot alignment within the longest lasting distance of 25 meters and formal lighting working occasion as well.
After easy use of 5V, 9V 1000mA AC/DC adapter, accepting wide range electric current of 100V to 240V, this 635nm
red laser diode module is always projecting highly visible red laser beam at several miles far away. For the most important of all, owing to special use of extending electric wires for both 635nm red dot laser and DC power supply, it assures the most convenient installation, highly stable dot emission under increasing temperature and serious electric current impact as well.
In a large variety of industrial and high tech precise dot measuring work fields, on basis of real work distance and lighting occasion, 635nm red
laser diode module enables correct use of output power and easy mounting onto any other machine or device. It projects noncontact and no barrier red dot aligning source from laser beam aperture. At the same time, within long lasting dot aligning work within 8 to 10 hours, after special use of APC, ACC driving circuit board, this
red alignment laser assures the most reliable and no decay light dot emission in proper use. When users are taking laser safety measure and wearing proper laser safety goggles, without any eye exposure to laser beam aperture, it just achieves no danger and no mistake use in all occasions.
You need to be a member of On Feet Nation to add comments!
Join On Feet Nation