Many HP printer users have HP Printer Error Code 49 in the past. It's a common problem with printers in the HP LaserJet line. After thorough testing and review by trained technicians, they have established that the problem is primarily caused by three factors: software problems, formatted or firmware defects, and communication issues. In addition to the Code 49 mistake, Secondary errors such as 49.4C02, 49.4CF2, and others are connected.

Hp printers have the ability to record error codes and view them on the computer screen so that the user can easily resolve the issue. Hp printer error 49 is said to be a serious cause of bad printing commands, corrupted data, various invalid operations, firmware, formatted, or even EIO card or memory accessory failure.

Have you ever used an HP LaserJet printer and had similar issues with the printer head displaying errors? Then read on to learn how to repair hp printer code 49 error in this post, in which we spoke with many skilled printer technicians before sharing the solutions to the 49 error.

Method to fix Hp Service 49 Error Code

1.Unplug the network cable and clear the print cue – Power cycle the printer and see if the error reoccurs. If not, the error may have been caused by a print job that was too complex or using a certain graphic not supported or recognized by the printer.

2.Convert the document- Convert your document to another software application. For example, convert a Word document to a PDF or vice versa. The logic behind this is that you probably have a command in the document that the printer doesn’t know how to handle. When you convert the document to new software the data is reformatted.

3.Remove the JetDirect-network card – Turn the printer off, remove the network card, and turn the printer back on. If error clears with the card removed, it is likely a defective card.

4.Remove the printer's hard drive – If applicable, remove the printer's hard drive – if error clears, the hard drive may be defective.

5.Remove any additional printer memory – Printers that have memory DIMM as a firmware backup may not be removed.

6.Perform a cold reset to restore all factory settings. (Including IP address)

7.Install current printer driver

8.Upgrade The Printers Firmware

9.Replace The Printer's Formatter Board – If the firmware DIMM - CFM has been upgraded or replaced and the 49 error continues, the formatter should be replaced.

As we do also carry the remote access as per the seeking of the customers by their permission. We carry a global presence and have offices in UK, USA, and Canada. Call us for any technical help. With the help of our tremendous support of our experts who are highly trained and qualified we provide simple and quick solutions at a very affordable price, our main motive is to satisfy customers with help of year experience in the technical world.

we plight to offer the best of services in hp printer solution and quickly analyze the problem as well provide a solution so don't get hesitate to call us we are here for you to provide you the of Hp solutions regarding HP Printer Not Activated Error Code 20 and other printer errors. do visit us hp support phone numbers and get free from any printer issues.