The jaw crusher has always been at the forefront of the stone production line as a “rushing warrior” in the stone breaker. However, when the jaw crusher fails, it will seriously affect the operation of the entire production line, thus making the production efficiency change. low. Of course, if you do it in a timely manner and it will not cause too much damage, then will you solve these problems of the jaw crusher?
What should I do when the jaw crusher bearing temperature is too high? First of all, we should first analyze the cause of the problem, and then prescribe the right medicine. When the bearing temperature is too high, it is nothing more than a large amount of heat generated by friction. At this time, it is necessary to add lubricating oil in time to reduce the friction of the bearing. Of course, if we observe that the bearing wear is serious, we must directly replace the bearing.
Jaw crusher is not uniform? At this time, we have to check whether the sieve is intact and the wear of the hammer. The cause of this phenomenon is basically the two reasons of excessive wear of the hammer and the breakage of the sieve. After finding the specific reason, it is solved accordingly.
Jaw crusher production is less? At this time, we should observe the feeding condition, see if the feeding is uniform, and whether the discharge port is blocked. Uniform feeding and timely cleaning of the blocked discharge port can effectively prevent the phenomenon of low output.
Does the Crusher Machine have abnormal sound during operation? At this time, we should stop and observe whether there are loose parts inside the machine. If it is loose, it should be reinforced. Usually, it should also be developed before the start-up inspection, so that there will be no problems and then stop processing, affecting production.
In short, when there is a problem with the jaw crusher, we should promptly deal with it, usually pay attention to correct the wrong operation method, learn the relevant maintenance knowledge, and do regular inspection and maintenance of the jaw crusher, so that we believe that the jaw crusher The problems that occur with the machine will also decrease, and your ability to solve problems will be greatly improved.