Which type of crushing is best used in Quarry crusher, the jaw crusher is divided into strong jaw crusher and HJC high efficiency jaw crusher, all adopting the most advanced technology at home and abroad, leading other manufacturers, strong jaw crusher is suitable for hard Rock crushing, high efficiency and energy saving, adjustable grain size, simplify the crushing process, has the advantages of large destructive ratio, high crushing efficiency, cube shape and selective crushing, etc. It is most suitable for crushing compressive strength not higher than 280Mpa. The ore, rock, slag, etc., HJC high efficiency jaw crusher is mainly used for medium-sized crushing of various ores and bulk materials, and can crush materials with compressive strength not more than 320Mpa, which are divided into coarse and fine broken, two The stone produced by the company is far more in line with the mineral requirements than the stone produced by the natural large stone crusher.
The crushing method of Shanghai SBM Heavy Industry jaw crusher is curved extrusion type. The motor driven belt and pulley of the SBM Crusher Equipment move the moving jaw up and down through the eccentric shaft. When the moving jaw rises, the angle between the bracket and the moving jaw becomes larger. , thereby pushing the moving jaw to approach the fixed jaw, and at the same time the material is crushed, smashed, crushed, etc.; when the moving down, the angle between the bracket and the moving jaw becomes smaller, and the pulling rod is Under the action of the spring, the fixed boring plate is removed. At this time, the crushed material is discharged from the lower opening of the crushing chamber, and the motor is continuously crushed and crushed as a continuous crushing and discharging to realize mass production. This is the working principle of our SBM Heavy Industry Crusher. We understand that the crusher production operation will be better played!