The construction waste crusher is mainly a large-scale equipment for crushing building bricks and stones. The construction waste crusher has the following characteristics:
1. The construction waste crusher is not designed with a sieve screen bottom. Even if the high moisture content materials with high water content are crushed, it will not be blocked as soon as possible. The new construction waste crusher can work as usual even if it is raining, and it will not affect production. The traditional pulverizer with a sieve sieve is not suitable for raw materials with a moisture content higher than 8%. When the moisture content of the raw material is higher than 10%, serious jamming can easily occur, so that the hammer cannot rotate and the material cannot be discharged, even burned. Bad motors seriously affect production.
2. The construction waste crusher uses a two-stage rotor to crush the upper and lower stages, and the material passes through the upper-stage rotor crusher into fine particles, which are then crushed into fine powder after being conveyed to the lower rotor. The two-stage rotors are mutually crushed to achieve the best effect of the material powder and hammer powder, and finally the discharge port is directly discharged.
3. The construction waste crusher adopts high-alloy wear-resistance hammer head. The hammer head is made by forging with a train wheel. It is particularly strong and wear-resistant. It is firmer and more wear-resistant than the ordinary hammer head, which increases the service life of the hammer head.
4. The construction waste crusher adopts a unique two-way gapping technology. After the hammer head wears, the gap between the liners becomes larger and the grain size becomes coarser. There may be a gap between the center and the outward moving hammer head to continue to use, and the position of the hammer head may also be moved. . Both upper and lower sets of rotor shaft ends are equipped with flywheels. The flywheel can adjust the periodic speed fluctuations of the operation to make it run smoothly and evenly. It has added the inertia of rotation to overcome the resistance caused by the movement and saves power.
5. The construction waste crusher adopts the hydraulic starter casing, which requires only one person to easily complete all operations. It is not only safe and reliable, but also easy to maintain.
6. The construction waste crusher adopts a centralized lubrication system, which is convenient and quick with no shutdown. The lubrication system of the construction waste crusher is changed to the traditional way of filling the grease nipples and oil cups; the centralized oil distribution pump is equipped with one-step operation and multi-channel oil supply; the entire machine can be used at any time in the working state of the machine. Simultaneously filling the lubricating oil, because the entire oil circuit is closed, it can prevent dust from intruding and damaging the bearing, and the maintenance inspection is also convenient and quick.