In the production of Raymond mill, the phenomenon of tripping and powering often occurs, especially during the peak period of power consumption. The stability of voltage in industrial production is very important because it is related to the production efficiency of equipment and affects the equipment. When using the time, when the Raymond mill has tripped and powered down during production, what causes the Raymond mill to trip?
First of all, insufficient power supply or voltage instability is the cause of tripping and power failure. In most places, the power consumption is too large, causing some equipment to operate without moving. At the same time, Raymond mill belongs to large-scale mechanical equipment. The power is large, the electricity is used, and there is no stable and effective power supply. Obviously, tripping is taken for granted.
Secondly, the quality of the transmission equipment is not good, the line is wrong. In order to be able to operate safely, safety protection measures should be provided in the circuit facilities. If there is a problem, it will automatically trip and power off. This causes many reasons, such as: line connection error. , wire aging, equipment installation problems.
Then, the problems of the Raymond mill itself, problems with the connection of internal components, and unstable operation can lead to burnout of the line and timely detection of the state of operation of the equipment.
Finally, equipment trips occur occasionally in production. If you encounter such a situation, you need to check whether there are problems in the distribution box, wiring, etc., and then look for professional technicians to check the equipment and ask the customer to stabilize the power before the milling process is put into normal. It must be guaranteed, and the preconditions for the production of Raymond mill are guaranteed when the power is stable.
The above is the cause of the tripping phenomenon of the Raymond mill, and I hope to help you.