The first step in using Jumbo Frames is to change your MTU settings. MTU stands for Maximum Transmission Unit. You can change it on your router, switch, or Fiber Media Converter. You need to adjust it in order to make Jumbo Frames available on your network.

What Is Ethernet Jumbo Frames?
Ethernet Jumbo Frames are a networking feature that can increase performance. But they are only effective if all network devices in the communication path support them. They must work on the ingress and egress interfaces of each device. In addition, all devices must agree on a maximum jumbo frame size. Otherwise, they can cause fragmentation. Fortunately, network hardware has become increasingly adept at preventing fragmentation and allowing users to configure jumbos without compromising performance.
Ethernet Jumbo Frames are different from regular Ethernet frames in that they are larger and can increase data transmission efficiency by 50 to 100 percent. The size of a jumbo frame is at least 9018/9022 bytes, and most Ethernet devices are capable of supporting these frames.

How To Use Ethernet Jumbo Frames
You may be wondering how to use Ethernet jumbo frames. This type of frame size is different from regular ones and is often required when you need to increase the speed of your internet connection. This feature is usually supported by LAN side equipment, but you need to make sure that your receiving end can also support the larger size of the frame.
You must first change the MTU setting on your network interface to enable Jumbo Frames. You can do this with ifconfig or ethtool. Both of these utilities will give you a large amount of information. You will need to make sure that the value of your MTU is large enough for the speed you need for your connection.
The jumbo frame size will affect the speed of your connection if you use real-time protocols. This can cause voice and video to get choppy or drop out. However, you can mitigate this by adding QoS on the layer 2 and 3 interfaces, or by isolating traffic.

Conclusion
Ethernet jumbo frames are used for speed and high data transfer. They are especially useful for storage networks and vMotion networks. However, they do not benefit the network performance when used for DNS queries. Therefore, it is important to ensure the correct configuration of Ethernet nodes and switches to get the maximum benefit of jumbo frames.
Ethernet jumbo frames increase the speed of a network by using a larger bandwidth. This makes the entire network faster. However, if you're using jumbo frames on a small network, the benefit will not be as great. However, you won't have to spend hours setting up your network. Jumbo frames are simple to install and configure.
Ethernet jumbo frames have a large payload, which is usually more than 1500 bytes. This makes the transmission of large data easier. Since each Ethernet frame has to be processed as it travels through the network, larger frames make better use of the CPU and minimize interrupts. They also reduce the number of frames to be processed, which saves a lot of time.