When an ultrafine mill is in operation, any factors that will affect the production process of the equipment are worth our constant exploration and resolution. What we need to analyze here are some problems related to the vibration phenomenon, mainly caused by it. The reason, and the corresponding solution.
1. The loosening of bolts will cause the phenomenon of vibration of the equipment. If during production, the phenomenon of ultrafine mill vibration caused by the loosening of the bolts is indeed a phenomenon that occurs during the production, it is necessary to stop first, and then tighten, and the shutdown is to ensure safety. This is a point that cannot be ignored;
2. Irrational feeding may also cause vibration. When the ultra-fine mills of different types are in operation, the processing capacity is limited, so the nature of the materials that can be processed is also determined. If it exceeds the defined range, then It will lead to the occurrence of vibration phenomenon. Therefore, in actual production, we must ensure that all aspects of the equipment's feeding properties are in line with the equipment's production requirements, and then the amount of material input also needs to meet the equipment requirements. Generally, it is necessary to ensure continuous and uniform Feeding requirements, these aspects meet the requirements of the equipment, can ensure the smooth progress of production;
3. In the production of ultra-fine pulverizer, if the grinding roller and the grinding ring are worn out, it will cause the pulverizing operation to not be performed well. This process will also cause the vibration phenomenon to occur. The method is to replace the grinding roller or grinding ring to solve this vibration phenomenon;
4. If the material is too fine in the production of the ultrafine mill, there will be direct friction between the grinding roller and the grinding ring, and a sufficient thickness of the material layer will not be formed. This phenomenon will also cause the occurrence of vibration. The method is to control by adjusting the vibrating feeder to prevent the occurrence of excessive material phenomenon;
The article mainly introduces the phenomena of vibration of ultra-fine pulverizers, because the phenomenon of vibration will affect the production process of the equipment, resulting in a drop in efficiency and even a change in the life of the equipment. Therefore, it is more urgent to solve this phenomenon. , Here is a case for this situation. We have analyzed several reasons and introduced the solutions. We hope to help everyone.