The working part of the Working of jaw crusher is two jaws, one is a fixed jaw (fixed), fixed vertically (or slightly inclined at the upper end) on the front wall of the vehicle body, and the other is a movable jaw (moving), tilted position, and fixed The jaws form a large and small crushing chamber (working chamber). The movable jaws periodically reciprocate relative to the fixed jaws, sometimes separated and sometimes closed. Upon separation, the material enters the crushing chamber and the finished product is discharged from the lower portion; when approached, the material between the two jaws is crushed by bending, bending and splitting. How does the jaw crusher machine determine its particle size and production efficiency? The system is crushed under normal operating conditions and the processing capacity of the machine fully meets the design requirements and normal production requirements. The particle size can be adjusted between 10 and 300mm, and the production efficiency is 1-800T/H, which can meet the different processing needs of users.
In the production process of large-scale material crushing equipment, the jaw crusher machine is a crushing equipment commonly used in the mining industry, mainly used for rough breaking, but in normal work, the jaw crusher machine will not discharge. In other words, we often say card materials, what is the reason for the card material phenomenon? How to solve it effectively.
In the process of material crushing, the jaw crusher machine will not be stuck under the card material, because the boring machine is in the working process, the ore material with higher water content enters the crushing chamber, and the jaw crusher machine will contain water. The material is broken into small pieces that become the viscosity of the small pieces of material that will stick to each other and block between the two jaws in the crushing chamber, causing a jam or possibly rupturing. The material is mixed with the viscous mud so that the material sticks to a piece of the crushing chamber and clogging occurs.
Solve the clogging phenomenon: Before using the jaw crusher, the parameters of the crusher should be clarified, especially the material performance requirements. According to the requirements of the material of the jaw crusher machine, suitable materials should be put in place. Does not meet the requirements of the crusher production process, such as excessive temperature or excessive moisture, the corresponding processing can be carried out first, so that the material meets or meets the requirements of the crusher as much as possible.
An effective method is: when the material is sent to the crushing chamber for crushing, the operation of the jaw crusher machine is performed by a professionally trained technician, which can effectively reduce the occurrence of clogging.