There is the valve opening is not in place incomplete. There are machines in the system which are the main raw materials that cause our geothermal heat. Objectively speaking, our external insulation is not in place. According to energy-saving standards, the external requirements of full insulation, some developers in order to reduce costs in the middle to save a lot of material, there is not in place, so heat load increased.garden floor price

The second is the improper selection of the floor. Floor selection is the seller is also said to be geothermal-specific floor, there is no basis for this special, and today we see the geothermal floor than the Ka-specific, especially before the meeting we also see our screen than the production of the whole process of Ka floor, if Improper floor selection, resulting in large thermal resistance, heat dissipation effect is not good.best type of composite decking

The third is the room furniture, the floor is too large. That is, the furniture covered the ground, the heat is not distributed out, so the temperature of the room is not high. The fourth is the water temperature is too low. Some of the district in the measured process, less than 40 degrees. A lot of factors together, geothermal is not hot.wood plastic composite decking tiles 5-slab