Metal provides a powerful, durable and vandal resistant solution to block furniture. Material is straightforward to produce and is extremely charge effective. Bollards range between a lightweight parking article to bigger diameter security bollards used to protect buildings and pedestrians from going vehicles. The typical ranges are designed from 60mm as much as 300mm round part slight material tube and are available in a selection of models to match the specification and style of most schemes.

All material bollards are galvanised to and have the choice of dust covering to any BS or RAL colour. Gentle steel tube will come in various thicknesses up to size have a heavy wall. Diameters over that are 5mm solid as standard. Mild material tube comes in bigger wall thicknesses to supply the best security barriers.

Of really low maintenance, material needs just periodic cleaning with heated water and soap or a mild detergent. In large commercial areas or regions of a higher volume of traffic bollards might be at the mercy of more remains, to be able to maintain the specified end a far more repeated preservation plan is recommended.

Parts requiring car entry through the day and require a secure and secure region at night may utilise a telescopic bollard. The bollards have a mild raising weight, approximately 15kgs, and withdraw to walk out allowing for extended car access. Once the bollard is lifted and closed in stick it offers large security to the region, that design may also be manufactured in a thicker material wall to offer anti memory resistance.

Another option could be the installing removable material bollards. A ground security bollards outlet is installed and the bollard is lowered and locked in position with the floor socket protect plate and padlock. When the bollard is eliminated the protect menu lies remove to walk out ensuring there are no trip hazards.

Metal bollards can offer the ultimate alternative for security to parts, such as for example police stations and Ministry of Defence bottoms requesting anti ram bollards. Designed and produced having an internal metal primary to the bollards, providing additional anti ram resistance. For further strengthening the bollards may be cement stuffed to provide a further aspect to the opposition of the bollard.

Parking posts could be supplied in a few possibilities to accommodate the scheme's design. Bollards can be found with foundation dish fixings, the perfect alternative for multi storey vehicle parks, and is seen throughout the recently opened Westfield site, other the Olympic park.

For parking parts requiring accessibility in the afternoon and safety during the night flip material bollards lay at walk out letting a lot of space to underneath of cars parking over them.

Recesses can be included to any or all types of metal bollards, this permits for the supplement of high presence reflective tape. With the introduction of routine channels along with pedestrian areas reflective bollards are the perfect solution providing protection to pedestrians and cyclists through the day and at night.