Ok, so a lot of people are wondering the exact way involved in oil with spray makeup. In my 3-10"sub quadrangle videotape, I actually show you how to spot makeup a box to get professional results. No bone can tell the difference if you do it right. So do not suppose that by doing this it's going to look stupid or less seductive. If done rightly you can get any finish you ask. spray paint for fiberglass

In fact, a lot of people don't have the skill to use a curvaceous gun, so this will really be your stylish bet anyhow. What you're going to need, for a box like the one in the videotape, would be 3 barrels of High Figure automotive grade manual. 3 barrels of your factual finish fleece. Just make sure it's automotive grade and that it's a name brand makeup. Don't go cheap on this stuff. You can also get an bus clear fleece if you would like an redundant subcaste ofgloss.However, you can lay an hair of a metallic tableware, or gold for colors like orange or unheroic, If you would be using a light color. This just helps light reflect back through the makeup a bitsy bit. This isn't necessary, but does add a hint of redundant"pop"to your finish.
So as far as grits in your beach paper goes, you'll need about 6-7 different grits. I use 80 or 120 grits slice pads on my mechanical sander whenever I'm rough shaping the bondo. Once I get my bondo knocked down to the shape I want, I start grinding by hand with a 200 fortitude pad. Also I take the rest of my grits, and 1000 in the sanding process. Some people wonder just how numerous times and what fortitude to use. I've an factual fail proof formula you can go by. Write it down, publish it out, whatever, and put it up in our shop. Follow these way and your finish will be perfect. The figures just represent the fortitude to use.

The way are
bondo, 80, bondo, 80, bondo, 120, beach 200, 300, manual, 200, 300, manual, 300, glazing putty, 300, 600, metallic fleece, 600, 800, 1000, makeup, 1000, makeup, 1000, makeup, clear, 1000, clear, 1000, clear.

This will be the same for curvaceous spray jobs. The maquillages are generally a lot better than spot makeup, but again, if you're using a good quality spray makeup, and you do these way over, I guarantee you no bone can tell the difference. I actually can not tell one way or the other if it's done like I show over.
Just remember to use light fleeces, don't cutlet it on. The makeup will run and you'll have to beach a lot of makeup off to get the invariant face back. Also, when you spot, as I show in the videotape, start scattering in open air, move the sluice onto the box, all the way over, off the side into open air, also let go of the snoot. Don't press the snoot down and start scattering on the box. Start and stop in open air. This helps to keep the makeup face livery on all points the spray hits.