For the sand machine workflow, many customers think that as long as the production line, the rest is fine. This idea is incorrect and unscientific. In order to enable customers to have a correct understanding of the working process of the sand making machine, Shanghai SBM mechanical professional and technical personnel summarized the problems needing attention in equipment installation as follows:
During the installation of sand making production line equipment, if the equipment is not properly installed, the whole production line will not be able to work normally, which will also bring harm to the machine itself, as well as personal threats to sand making operators. Sand making machine is mainly composed of hopper, distributor, vortex crushing chamber, impeller, spindle, base, transmission device, bracket and other components of a sand making equipment.
Methods to improve the efficiency of the sand making machine: the sand making machine should be lubricated regularly. The lubrication method is dry oil lubrication. Mobil vehicle lubricating grease is used. The starting sequence of the whole sand making production line is as follows: discharging crusher feeding crusher must be started without load, and feeding can only be carried out after the crusher is in normal operation. It should cooperate with the production line of the whole set of sand making production line and reasonably configure supporting equipment according to different stone materials and crushing requirements.
Arrange reasonable operation training for operators, so that they are familiar with the operation process of sand machine to reduce the phenomenon of shutdown and shutdown caused by mistakes and incorrect operation; Regular maintenance inspection, such as bad phenomena, early solution, and in the new sand machine production process, must make the benefits to achieve. In the sand making production line, it is usually accompanied by the sand making machine for sand making again, so its installation and sand making machine has a great relationship. According to the different crushing site, sand production line equipment installation site will be different, generally installed in the plant or open field for operation.
Before the installation of stone crushing equipment, it is necessary to make an inventory according to the packing list, and check whether various parts are worn and complete in the process of transportation. When installing, the new type sand machine should be leveled so that its spindle is perpendicular to the horizontal plane. The upper part and both sides of the sand machine should be left with appropriate space for lifting and maintenance. After installation, a complete inspection should be carried out, for example, whether the lubricating oil pipe is firmly connected. Sand production line equipment before the test run must be re-added to the lubricating oil, and check the connection between the parts is solid and reliable, whether there are foreign bodies on the impeller, motor wiring is correct. After running, if there is any abnormal situation should immediately stop running. Such installation can be made sand production line, the greater improvement of sand machine production efficiency!