You go into the bathroom because you hear the sound of running water. Plumbers can be costly, but so can your water bill. So, what are your plans? Don't bother calling the plumber just yet. You can fix that toilet yourself in just a few steps. Only a few tools, some expertise are required.

The first step is self-evident: you must switch off the water. You should see a valve close to the floor behind the bowl that looks like the one for the hose outside. Turn it and the water should shut off. It's now time to drain part of the water.

Put your hand inside the toilet and feel around; if you're lucky, you'll be able to touch the small toy or hair brush that's keeping things together. If you can reach it, simply pull it out. Re-start the water. You've saved some money.

This is when things get complicated if you can't feel the obstruction. It is better to call professionals offering services related to toilet repair in Long Beach, CA.

You can try once on your own. The following instructions will guide you through the process of replacing the toilet. After all, the idea is to have a fully functional device that is free of clutter.

You'll have to get rid of the old wax ring. This is crucial because leaks will occur if the seal is not good. Scrape the surface with a scraper. Anything flat will do, including a cake knife. Remove the new wax ring from the package with care and set it in the same spot as the old one. Because there is still some residue, this should be simple. Lift the toilet up and gently place it over the bolts sticking up through the floor and onto the new ring (no sliding). Be cautious here; the seal must be in good condition. Retighten the bolts if necessary. As you turn the bolts, alternate them to maintain a tight, equal seal.

Reconnect the water supply. Look for leaks towards the bottom of the bowl and along the floor.

In case you are looking to installing toilets in Long Beach, you can search professionals online.