Sand machine use matters:
1. When the sand making machine is working for 400 hours, it should be added with proper amount of grease. When the work reaches 2000 hours, the spindle assembly should be opened to clean the bearing. If it is working until 7200 hours, it will be replaced. The bearing is gone.
2. The sand making machine should pay attention to routine maintenance. It is necessary to let the sand making machine get sufficient downtime on a regular basis, and regularly observe the internal wear of the sand making machine. If there is wear, it should be replaced or repaired in time. Also note that during the normal working process of the sand making machine, the observation must not be opened to avoid dangerous accidents.
3. The tension of the transmission triangle tape should be adjusted appropriately to ensure that the triangular tape should be grouped and matched, so that the length of each group is as uniform as possible. Should be adjusted, the difference between the two motor currents does not exceed 15A.
4. In the course of work, because the SBM Crusher Equipment belongs to high-speed operation equipment, special attention should be paid to safety. The staff should be away from the equipment. If you need to repair the machine, you need to power off before you can operate.