Welcome to
On Feet Nation
When users are looking for an easy operating and good direction cross line alignment tool, it is an efficient solution for users to apply 532nm green cross line laser module. It is always making easy and quick cross line alignment after the use of an external electric power source. Owing to basic use of thermal emitting system and qualified glass coated lens with different fan angles, after production into a quite small size tube diameter, this green laser enables quite easy installation, and convenient green cross line projection onto various working surfaces effectively.
Owing to the use of advanced 532nm green DPSS laser tech, among middle part of all visible laser devices, this 532nm green cross line laser module is able to work with the most sensitive color and easy absorbing green laser light from laser beam aperture. It gets the lowest laser beam divergence of less than 1mrad. When it is pointing at quite longer work distance out of hand reaching, owing to its wide range output power of 5mW to 100mW, this cross laser alignment just emits highly visible green laser beam at several miles far away, but also projecting highly fine and straight green cross line source within the maximum work distance of 25 meters.
In close distance of 10cm, this 532nm green cross line laser module is only projecting highly fine cross line of 0.3mm. It is reaching as fine as 1mm to 2mm line fineness at longer work distance of 2 meters. Employing the most qualified glass coated lens with different fan angles of 10, 15 and 110 degree, it is projecting different dimension green cross line source at various work distances. It is projecting two perpendicular lines with accurate 90 degrees, after production of different lengths of 0.5 meter to 6 meters, this cross laser alignment also gets no appearance of laser light decay or blur in continuous use.
After the use of a laser alignment mounting bracket and extending electric wires, within the maximum installed distance of 3 meters, 532nm green cross line laser module always makes easy and no track cross line indication onto various working surfaces. It is operating without any serious barrier of long distance, high height and other complex working environments etc. In addition, after correct selection of output power and glass coated lens degree, this industrial alignment laser also enables easy screw of adjustable focus. It gets efficient green laser light conversion and extremely fine green cross line projection at various work distances. In occasion that users are paying high attention to thermal energy hurt to eyes and wearing correct laser safety glasses, high power green cross laser still makes no danger and no mistake measurement perfectly.
© 2024 Created by PH the vintage.
Powered by
You need to be a member of On Feet Nation to add comments!
Join On Feet Nation