One component Poyurethane for EPDM granules and SBR granules, used on the playgrund, athletic track and sports flooring.
Ensure the ground to be coated is well prepared. All loose material should be removed. Ensure the surface is free from contamination such as oil and grease. The surface should also be dry.

SBR Bottom Layer/EPDM Top layer

Mix rubber granules and binder at desired ratio.

Ensure the volumetric ratio of binder addition is considered as the bulk density of rubbers will vary. Rubber granules should be dry in order to stop accelerated cure times and foaming of the binder.

For adequate mixing, a mixing machine should be used. Rubber and binder should be mixed for upto 5 minutes ensuring all the rubber is coated.

The product can then be laid out on a prepared surface and compacted using a hand trowel or paving machine. Ensure an even compaction of the rubber. A release agent should be used on all tools to avoid adhesion of the binder to the tools. Ensure all equipment is cleaned well after use.

MDI polyurethanes are subject to colour changes during exposure to ultra violet light. This will not affect the mechanical properties of the binder.