In the installation process of the impact sand making machine, if it is not installed correctly, the whole production line will not work properly, it will also bring harm to the machine itself, and pose a personal threat to the sand making operators.
The sand making machine is a kind of gravel equipment mainly composed of a feeding hopper, a distributor, a vortex breaking chamber, an impeller, a main shaft, a base, a transmission device and a bracket. The impact sand making machine is a new type of sand making machine modified according to the principle of the sand making machine.
In various stone production lines and sand production lines, sand making machines are generally equipped with crushers for re-crushing. Therefore its installation has a lot to do with the crusher. The location of the impact sandblaster will vary depending on the location of the crushing site. It is usually installed in a factory building or in an open space.
Before installing the impact sand making machine, first check the packing list to check whether the various parts are worn or not during transportation. During the installation, the sand making machine should be leveled so that its main axis is perpendicular to the horizontal plane. Appropriate space should be left above and on both sides of the sand making machine for hoisting and maintenance. After the installation is completed, a full inspection should still be carried out, for example: whether the lubricating oil pipe is securely connected.
The impact sander must be re-added once before commissioning, and check whether the connection between the components is firm and reliable, whether there is any foreign matter on the impeller, and whether the motor wiring is correct. After the operation, if there is any abnormality, stop running immediately.