The second one is the battery. We don't need to reapply the glue because it appears to be fine now. We need to put this back together again tonight. It's going to block the way of the battery as well, so we must connect the battery. So simple. If you want, you can put all the screws back here. So let's take a look. As you can see, the power is coming on, which means everything is connected properly.
Now we're going to check the touch. If the touch is fine, we're going to go to emergency because we don't know the password vibration. Everything appears to be in order. So now we're going to test the charge because that is the most important thing
phone parts.
We remove the charging board and pull it out. change the complete screen panel for the Samsung No. 20 Ultra 5G It's super simple, it seems very easy, a lot of tasks are in there that you need to change this and that, you know, you need to pull this out, but it's not too hard, as I told you very patiently if you do it. It's super simple.
So right, so that's the back camera. I'm going to leave it inside the pack just to keep it dust-free. slowly, we must disconnect all of them one by one, okay, by removing the screws. one All right, so this side is finished. Gently pull this out. Before we do that, let's disconnect it first. It is disconnected. And try to pull this out. While you're doing that, make sure you disconnect the connector
lcd phone parts .
Let me give you some clues for this first thing. If you have any problems or questions, please leave them in the comments section, and this video will suffice to replace the battery. Thank you.
You need to be a member of On Feet Nation to add comments!
Join On Feet Nation