The jaw crusher has always been an important crushing device for the coarse crushing process in the stone production line and the sand production line. Since the feed port of the jaw crusher is large, it is a primary crush in the crushing production line, which shows his importance. The traditional PE series jaw crusher is a toothed plate extrusion type of round-trip crushing, and the broken material can only meet the requirements of entering the impact crusher and fine crusher for crushing production. Therefore, he is usually in the stone production line. The highest point is broken.
As a new generation of high-performance crusher, jaw crusher surpasses traditional E-break in performance, maintenance cost and structure, and can be widely used in metal and non-metal mines, cement, construction, sandstone, metallurgy and other industries. PE series high-energy rupture is used in the production process of building gravel and machine-made sand, especially when crushing hard materials such as basalt, it has higher production efficiency and lower running cost than traditional smashing.
According to the principle of the PE series jaw crusher, a buffer spring is added to the back, so that it can play the role of buffering the pressure during the production, which further increases the particle size and the degree of extrusion, if it is in production. When the discharge is too large, only the adjustment of the bolts behind will strengthen the discharge particle size of the entire stone production line to alleviate the pressure of the secondary crushing to achieve the overall production efficiency improvement, and the discharge granularity is uniform.