Calcite A mineral containing high natural calcium carbonate, which is widely distributed throughout the world. The gloss of the glass is presented, the Mohs hardness is 3, and there are many mechanical equipments for processing calcite. Then, is the processing calcite using grinding milling machine? What are the advantages?
Feasibility analysis of calcined powder by ultra-fine grinding machine
The ultra-fine mill using the principle of intergranular lamination is used to grind calcite. In the crushing chamber, the phenomenon of “stone crushing” is presented, which replaces the traditional single-grain grinding principle, which not only realizes the selection of materials. Sexual processing, but also can significantly increase the product fines ratio and cube content, greatly reducing the needle-like material, at the same time, can also reduce the wearing of wearing parts
Secondly, in the modular design of the ultra-fine mill, Shanghai SBM can realize the conversion of coarse, medium and fine crushing by changing the cavity type. The processing granularity can be switched between 300 mesh and 3000 mesh, and the production can be improved. At the same time of benefit, it can also meet the large production demand of the customer's other stone powder products, so in general, the use of limestone mill to process calcite is a natural fit.
The production process for processing calcite using ultra-fine mill is as follows:
Firstly, the raw material is broken into the jaw crusher by the vibrating feeder, and the crushed calcite stone is evenly conveyed by the belt conveyor to the ultrafine mill for the second crushing and grinding. The produced ore fine material is rounded. The sieve is sieved, and the larger stone is returned to the grinding chamber for processing again. This is called returning; other suitable stone materials are sent to the modification machine for modification. This step depends on the customer's needs. If the quality of the stone is not high, you can omit this step and send it directly to the packaging collection.
Is the processing calcite using an ultra-fine grinding machine? The answer to this question is already obvious. Shanghai SBM is committed to research and development of equipment for processing and processing calcite for more than ten years. It has superb technology and perfect pre-sale, sale and after-sales service. You are welcome to call us.