Welcome to
On Feet Nation
Helen Online
Micheal Jorden Online
Raymond Online
jack Online
Bruce Online
geekstation Online
Louis Online
Edward Online
stephen005 Online
Posted by James Klinger on December 26, 2024 at 6:04am 0 Comments 0 Likes
Selling a house is often a significant financial transaction, and understanding how to calculate the profit from the sale is crucial. If you’ve ever wondered, "When you sell a house how much do you get?", it’s important to consider all the factors involved, from the sale price to the costs…
ContinuePosted by Micheal Jorden on December 26, 2024 at 6:04am 0 Comments 0 Likes
The number of lumens needed for bathroom lighting depends on the size of the room and personal preference. Generally, we recommend about 50 to 75 lumens per square foot for bathrooms. For example, a small bathroom that is 5 feet by 8 feet (40 square feet) requires 2,000 to 3,000 lumens (50 to 75 lumens per square foot).
Determine how many lumens you need
Lumens are a unit of light. To determine the lumens you need, you need to multiply the square footage of the room by the foot candles you need for that room. For example, a 100 square foot living room requires 10 to 20 feet of candles, but 1,000 to 2,000 lumens. commercial exterior led flood lights
Generally, any light suspended 20 feet or more above the ground is considered a high bay light. The name "high bay" is used because these installations are traditionally used in industrial or commercial bays. High ceilings often have chains, hooks, and pendants attached to the ceiling.
Larger, lighter bays require ceiling heights of 10 feet to 25 feet or more. Some high bay lights can be installed at heights exceeding 30 feet, while low bay lights can be installed at heights ranging from 10 feet to 25 feet. A special reflector can diffuse the light. evenly throughout the space.
Metal halide lamps consume a lot of energy, consuming an average of 400 watts. For comparison, a large LED array draws 150 watts.
According to federal guidelines (specifically Federal Motor Vehicle Safety Standard No. 108), the maximum brightness for headlights is 3,000 lumens, expressed variously as 3000K, 3000 LM, or 3000 candela. .high bay led lights 30000 lumens
Calculate lighting requirements: Determine the total square footage of your store. In this case, 40 feet x 60 feet = 2,400 square feet. Typical store lighting requires approximately 50 lumens per square foot. So, for a 2,400 square foot store, you would need a total of 2,400 * 50 = 120,000 lumens.
The spacing of large bay lights varies depending on height. If the height is 20 feet, it can be 15 feet with good lighting and 18 feet with normal lighting. For a height of 30 feet, we recommend light spacing of 20 feet for brighter lights and 25 feet for regular lights.
High bay light fixtures are typically applicable to large areas with ceiling heights greater than 20 feet. In contrast, low bay light fixtures are meant for larger rooms with ceiling heights of 12 to 20 feet. This is due to the difference in power, lumens, and beam angle between the two.
Choosing the Right Garage Light Fixture
Calculate the square footage of your space by multiplying the length and width. For garage work areas that require task lighting, use approximately 300 lumens per square foot.
© 2024 Created by PH the vintage. Powered by
You need to be a member of On Feet Nation to add comments!
Join On Feet Nation