We have a large stock of machines and tools for the setter Browse our site, find the tool you need, and get in touch with us

INSTRUCTIVE LARGE FORMATS / cortadora de ceramica

Adhesive preparation and gluing

cortadora de ceramica

Separadores arcos

herramientas para grandes placas porcelanato

Las mejores herramientas rotativas 2018

cortadora sigma

cortadora montolit

herramientas para colocar porcellanato

cortadora porcelanato

Cortadora electrica porcelanato

herramientas ceramica

San Pietro Laminas

cortadora rubi

Equipos para grandes formatos

Porcellanato italiano maquinas

pinza niveladora

Niveladores y cuñas

arcos y cuñas

sistema de nivelacion

When preparing the ceramic / porcelain adhesive mix it is important to respect the proportions recommended by the manufacturer and use a low speed mixer such as IPERBET that will ensure that no air enters the mixture ensuring proper production of the adhesive. Most mixers work at high speeds which cause the air to enter the mix and can cause the adhesive not to be sufficiently uniform. If this happens, the performance of the adhesive may not be the desired one.

Once the adhesive is ready, the spreading trowel will be chosen according to the thickness of the plate. Always put adhesive on the plate and on the surface where the plate will be placed. It is advisable to place the trowel of greater number to glue the wall or floor and the one of smaller number for the plate, in this way the weight to be supported will be reduced at the time of moving the plate. It is important to keep in mind that the inclined trowels will provide the required design so that the adhesion between the plate and the folder is total. At the time of applying the adhesive, the same application address must be respected on the plate and in the folder as this will allow to effectively removing all the air Remainder between the surfaces to be glued once the plate is placed. It must be taken into account that the adhesive has a maximum time of exposure to air after which it will lose bonding capacity so this time should not be exceeded by the operations of gluing and positioning the plate, verify this time with the manufacturer of the adhesive.

CortadoraPorcelanato, Cortadora electrica porcelanato, San Pietro Sheets, Tools Ceramica, Cortadora Raimondi

The RLS / RLS 3D leveling system is an innovative system for laying porcelain or ceramic tiles. In addition to ensuring perfect leveling, it helps accelerate

Ceramic Cutter, The Best Rotary Tools 2018, and Tools for Large Porcelain Plates, San Pietro Sheets, and Tools DektonSilestone

Website: http://raimondiarg.com.ar/