WPS Connection Method

Before we start, there are a few conditions that must be met so as to utilize the WPS push button strategy:

The passageway must have a physical WPS push button accessible. If it's not too much trouble check with your gadget's client direct for subtleties.

In the event that the WPS push button isn't accessible please utilize the guidelines in the Standard Connection Method area.

Your system must utilize the WPA (Wi-Fi Protected Access) or WPA2 security convention. Most WPS empowered passageways utilize this convention to set Canon Pixma pro 100 setup.
Stage 1

1. Ensure that the printer is turned on.

2. Press and hold the [Wi-Fi ] button on the facade of the printer for a couple of moments.

Stage 2

1. Ensure that this catch begins to streak blue and afterward go to your passage and press the [WPS] button inside 2 minutes.

For careful insights about squeezing the WPS button, if it's not too much trouble allude to the passageway manual.

The (blue) Wi-Fi light on the printer will keep flashing while at the same time scanning for, or interfacing with the passageway. At the point when the printer has effectively made an association with your remote system, the blue light will quit blazing and stay lit.

System settings affirmation

To affirm that your printer is effectively associated with your remote system, you can print out the system settings of your printer on the off chance that you wish:

Ensure that your printer is turned on.

Burden a sheet of A4 or Letter-sized plain paper.

Press and hold the [Resume/Cancel ] button until the power light flashes multiple times, and afterward discharge it. The system data page will be printed.

When alluding to the printout, watch that the "Association" designates "Dynamic" and that the SSID - Service Set Identifier (the name of your remote system) demonstrates the right name of your remote system.

This finishes up the WPS arrangement methodology.

Please now continue by introducing the product to make the most out of your PIXMA PRO-100.

On the off chance that you don't have the establishment CD that accompanied your item, if it's not too much trouble download the manuals and programming to proceed.

In the event that the remote arrangement is as yet bombing subsequent to following this guide, if you don't mind get in touch with us for further help.

Standard USB Connection Method

1. Addition the CD that accompanied your printer and run the arrangement.

Windows Users – If the "Arrangement CD-ROM" doesn't autorun, embed the CD-ROM into the PC again and click on [My Computer], select the CD-ROM and double-tap [MSETUP4.EXE].

Windows 8 clients - double tap [Canon_IJ]. At the point when the choice window opens, double-tap the [MSETUP4.EXE].

Macintosh Users – Double-click the [Canon_IJ] symbol mounted on your work area. At the point when the determination window opens, click [SETUP] to begin the product download connect canon Pixma pro 100 setup.

In the event that you don't have the establishment CD that accompanied your item, if it's not too much trouble download the manuals and programming to proceed.

2. At the point when the underlying screen shows up, click on [Next].

If it's not too much trouble note: Some models that are likewise furnished with a wired system association, may have an extra screen requesting that you select between a USB or Network association. In the event that you see this screen, if you don't mind select [Network Connection].

3. Select [Wireless Connection] as an association strategy.

4. Guarantee that your printer is turned on, ensure the power light is on and afterward click [Next].