Apple released Mac Mini in 2012 as one of the most likable devices for the people so much so that people are still using it. Last time Apple upgrade Apple Mac Mini in 2019 like a little computer inside the machine. In this blog, we will teach you how you can improve your old Apple Mac mini without spending lots of money.

Here are the products that are used while updating your Apple Mac mini:-

The New storage in the Mac mini:-Kingston 480GB SSD in Doller 60 on Amazon

Blowing fibers: – Canned air at Doller 14 on Amazon
The Perfect cable:- Amazon Basics miniDP to DP in Doller 9 on Amazon

The Best tools: – ORIA Magnetic Screwdriver set Doller 16 on Amazon
Magic wire: – Mac Mini second drive kit Doller 15 in on Amazon
A second hard drive: – Seagate Firecuda 1TB in Doller 60 on Amazon
More memory: – Crucial 16GB RAM kit in Doller 79 on Amazon

1) What You Need to Upgrade

The Apple Mac Mini 1012 model is an Apple last upgradeable device. In new models, users can see something in their device like RAM that is release in 2018 but not in Mac mini 2012 model.

In the Mac Mini, you may enhance your RAM maximum 16GB, and also exchange internal drive for SSD. You can also add a new drive for more storage.

Parts are not expensive and also not difficult to install; it can take a few hours to update your device and can bring your Apple Mac Mini for long life.

2) Installing SSD

SSD installation is the single best way to upgrading your device; this can help you speed up the data transfer 4-times faster making a huge difference.

Here are the steps on how to install SSD:-

Turn your device over.
Put your thumb on the round divots and rotate it to anti-clockwise.

Now the base will be removed away, and here you need to a credit card or any plastic tool to pull the base.
Take a Torx T9 and T8 screwdriver.
Now, remove all the screws from the broadcast shroud.
Remove the shroud carefully.
Here you need to remove couple screws near the fan while one from black shroud.

Take apart the Black shroud.
Now, carefully remove the fan from your logic board.
Slide any business card under the hard drive.
Separate SATA cable carefully from the hard drive within the logic board.

Remove the actual hard drive from the Apple Mac Mini.
Separate Torx T8 screws within the hard drive.
Joint that similar screw on the left side of the SSD.
Separate the fabric cable from old hard drive.
Attach the same fabric cable with the new SSD connectors.
Use the business card here to support the slide of the latest SSD drive.

Reattach the fabric cable with the motherboard.
And do the same steps that you have done earlier, removing the shroud then fan and wireless to reassemble the Apple Mac Mini.
You all set your SSD driver is installed successfully.

3) How to Attach a Secondary Storage Drive

Here are the steps on how to attach a secondary storage drive:-

Go through steps 1 to 16 from the above steps that you have used while installing an SSD driver.
Here you need to separate the remaining cable from the magic board like a wireless shroud or IR cable.
Remove your second install kit.
Now, remove the last pin of the magic board.
Now put the motherboard removable tools in the holes.
Remove the logic board within the case.
Detached the power supply.
Pull out the logic board.
Remove 2 Torx T6 screws holding the power supply and bracket.
Move out the remaining clip within the power supply.
Rotate the socket to 90 degrees.
Off the power stores from the device.
Remove the drive bracket carefully.
Joint the rubber grommets into the install holes.
Insert the drive in the box and line up the device to closing.
Here you need to follow the steps 17-20 to resemble the device.

4) Reinstalling macOS

Here are the steps on how to reinstalling macOS:-

Launch the Apple Mac Mini.
Tap the CMD+Option+R button at the same time.
This command will take a couple of minutes after then you can download a fresh factory version of macOS Apple sites.

5) How to Upgrading the RAM

Here are the steps on how to upgrading the RAM:-

Turn your device over.
Put your thumb on the round divots and rotate it to anti-clockwise.
Now the base will be removed away, and here you need to a credit card or any plastic tool to pull the base.
Remove the metal brackets near the current RAM sticks.
Pull them away when the popup.
Line up the device to stick the New RAM into the device.
Push down the shroud to lock the place.

John Smith is a creative person who has been writing blogs and articles about cybersecurity. He writes about the latest updates regarding mcafee.com/activate and how it can improve the work experience of users. His articles have been published in many popular e-magazines, blogs, and websites.

Source:- https://simplemcafee.com/how-to-upgrade-2012-mac-mini-for-use-in-2020/