The small series of SBM cobblestone sanding machine introduces how to solve the vibration problem of small sand making machine.
Small sand making machines are being used because they are exposed to harder rocks such as granite, limestone, pebbles, sandstone and shale. Both pressure and wear are greater. Sometimes small sand making machine vibrate strongly.
Once the small sand making machine vibrates strongly, the output of the material will be affected, and if it is serious, the entire machine will be damaged. When the small sand making machine vibrates strongly, three main measures should be taken:
1. Ensure that the weights of the two sets of hammers in the small sand making machine are balanced. In general, the quality of the hammer cannot be guaranteed to be the same. There is an error value. This error will not exceed 5 grams. It will not work. If it exceeds 5 grams, it must be noted. At this point, it must be replaced. One of them makes the weights of the two hammers equal.
2. In addition, the small sand making machine is under strong force, and the strength of the whole machine to bear the looseness of the nut is inevitable. This requires fixing the screws of the machine in time. Of course, this work is mainly done by constantly checking the machine.
Many things have a certain service life, and the components of a small sand making machine are no exception. When the spindle of a small sand making machine is used for a long time, it may bend due to wear and the like. At this point we must replace the spindle of the small sand making machine in time to ensure consistent strength in all aspects to reduce the number of vibrations.