We all have a soft spot in our hearts for low-lying areas. Some of us have converted our basements into movie theatres or recreational areas. However, radon poisoning continues to claim the lives of countless. Getting a free
radon test kit walmart from your local government is the first step toward having fun in your basement without worrying about the presence of this radioactive gas. Your home's radon levels can be determined with the use of this test kit.
Although the equipment is free, the Government's health department closely monitors its design and you shouldn't underestimate its capabilities. Actually, they're a part of the government's effort to prevent lung cancer caused by radon. The free radon test kit is not always supplied free of charge; you may have to pay for the kit itself but not for shipping or lab testing.
The basement is an obvious place to start. Due to the fact that we are exposed to radon through the soil and the water we use on a daily basis, this is why it is so important to be aware of radon levels in our homes. Whatsoever, we must utilize the free radon test kit near ground-level areas whenever possible.
Experts advise that we do the experiment on a year-round basis, regardless of the season. In spite of this, the risk of radon is higher in the winter than in the summer months. When it's cold outside, we tend to keep our doors shut, increasing the likelihood of snow accumulation. The only way to stop this gas from escaping is to seal the pores and crevices.
Radon Facts - What It Is And Why It Should Be Tested For In Your Home
In soil and rock, uranium decay produces radioactive gas radon, which has no color, smell, or taste. Radon, the second biggest cause of lung cancer, kills 15,000 to 21,000 people in the United States every year and has been detected in every state. There is a percentage of radon that remains in the earth and dissolves in subsurface water after it has been produced. Over 6% of all homes in the United States have elevated radon levels, which may necessitate a radon mitigation system. Radon testing is recommended by the EPA and several state governments. All Radon exposure, according to the EPA, has some risk. Picocuries are the units used to test radon. Radon's radioactive decay rate is measured in picocuries (PCI). If the levels average 4 picocuries per liter or more (pCi/L), remediation is recommended. There is no way to tell how much Radon is in the air unless it is tested. Some states demand radon testing as a condition of approving a mortgage loan or transferring property. Ventilation improvement may be necessary before a planned purchase can go through if Radon levels are too high.
More people get lung cancer from smoking than from radon exposure. Tobacco use and high levels of Radon exposure increase your risk of lung cancer. A Radon risk comparison chart for smokers and non-smokers is available from the Environmental Protection Agency (EPA). Inhaling Radon gas can cause radioactive particles to become lodged in your lungs, which can be dangerous. Damage to lung tissue can occur during the course of a person's life. A person exposed to high radon levels has an increased chance of lung cancer even if they do not experience any immediate negative health consequences such as a fever, headaches, or shortness of breath. Research reveals that radon in drinking water does represent a risk, although that risk is far lower than the risk of radon in the air.
From the soil or rock beneath the building, most of the indoor radon enters the building. When Radon is trapped beneath a structure, it can build up to dangerous levels of pressure. As a result of the increased pressure, gases are forced to condense in cracks and other gaps in a building. In order to assess if Radon levels are undesirable in a home or structure, a cheap Radon test should be purchased.
What is the technique for determining if a home has radon?
Testing for radon gas is both cheap and simple. It's as simple as following the instructions and mailing back the radon sampling bag in a self-addressed envelope. To collect a sample, all that is needed is to open the packaging and insert the sampler in the testing area. The date and time of the test's start and end are recorded on the supplied data card that is returned with the sample. For two days, the sampler should be exposed to the surrounding environment. For the price of the kit, you will receive a laboratory analysis and a complete report.
Data Included in the Report Include Report Date; EPA ID Number; State Identification Number; Lab ID Number; Kit Identification Number; Radon Level Measured (pCi/L); Test Location; Test Type; Start and Stop Date and Time; Test Method; Radon Health Risk; Explanation of Results; and Recommendations for Next Steps based on Radon Level.
You need to be a member of On Feet Nation to add comments!
Join On Feet Nation