Welcome to
On Feet Nation
yemuss Online
Helen Online
Christopher Online
Posted by yemuss on September 13, 2024 at 4:49pm 0 Comments 0 Likes
Posted by Helen on September 13, 2024 at 4:47pm 0 Comments 0 Likes
Posted by Christopher on September 13, 2024 at 4:46pm 0 Comments 0 Likes
Finding a good quality spiral Vibratory Polishing Machine for a good price can be challenging.This review will detail my
observations concerning the features, limitations and construction of
this machine.
Finding a good quality spiral coil binding
machine for a good price can be challenging. It can be difficult to
find a machine that is reliable, easy to use and has the features that
you need all for a decent deal. However, the Akiles CoilMac ECI claims
to be all of these things. In fact, it appears to be one of the most
popular coil binding machines on the market. I recently went out into
the warehouse and opened up one of these machines to see if the
Coilmac-ECI is all that it claims to be. This review will detail my
observations concerning the features, limitations and construction of
this machine.
Features:
The first feature that I decided to test on this machine was the
punching mechanism. The ECI has a manual punching mechanism that is
rated for punching up to 17 sheets of paper at a time. When I actually
tested my machine I found that it would comfortably punch between 14-15
sheets per lift. Seventeen sheets of 20lb paper was possible but you
had to pull pretty hard to get it to punch. The Coilmac-ECI had no
problem punching the clear covers or polycovers that I tested on it.
However, punching plastic covers should be limited to 2 sheets at a
time with this machine.
Second, I wanted to take a look at the coil inserter. The machine has
two rollers mounted near the front of the machine. There is a switch to
turn the coil inserter on and off and a foot pedal control to activate
the coil inserter. The coils spin very fast and help to spin the coils
onto your books. The inserter on ECI includes two fixed spinning
rollers. This makes it great for spinning smaller sized coils (larger
coils will need to be inserted by hand). The foot pedal control is very
useful, it allowed me to hold my documents with both hands while I was
inserting the coil.
The ECI had a few other features that I thought were worth noting.
First, it has a number of disengageable dies on the front of the
machine. These dies allow you to pull a punching pin for dealing with
different sizes of paper. Using these pull pins you can use the ECI to
punch 8.5", 11", A4 and A5 paper. This is a pretty good selection of
sizes and will fit the needs of most organizations. I also noticed that
the Coilmac-ECI includes a continuous punching guide. This is simply a
small metal tab that extends from the right side of the machine. If you
need to punch documents that are longer than 13" you can simply flip
them over and place one of the holes over the small dot on the
continuous punching guide. This makes it a lot easier to line up the
ECI for punching legal size and 11" x 17" paper or other large format
sheets. With a little bit of ingenuity you can also use the ECI for
punching oversize covers by lining up the edge of the covers with the
end of the punch and pulling the appropriate pin (this is not a
recommended application).
The Coilmac-ECI also includes a depth of punch margin control that
allows you to adjust the distance of the holes from the edge of your
paper. It comes with a pair of spiral coil crimping pliers to help you
finish your documents. It also has a heavy duty metal edge guide
adjustment knob that makes it easy to line up your documents for
punching.
Limitations:
In using the CoilMac ECI I didn't really notice any glaring
deficiencies. However, punching paper for large documents was a little
bit tedious and repetitive. For users who need to do a lot of binding
or who do large books I would suggest looking into an electric punch.
However, the version of the ECI with an electric punch costs almost
$1000 more so depending on your volume and your budget this machine may
still be a good fit for you.
As I noted above, the coil inserter will not work with larger sized
coils (probably anything larger than 30mm). However, this is common for
integrated inserting devices. To fix this problem you would need to buy
a standalone inserter and it still won't do a great job of the larger
books. The ECI is also not ideal for scrapbooking and other highly
customized applications that use odd sheet sizes. The disengageable
dies on the ECI will work great for punching standard sheets but are
not flexible enough to punch fully custom lengths. If you anticipate
the need to punch sizes other than half letter (8.5"), letter size
(11"), A4, A3 or legal size you might look for a machine with fully
disengageable dies.
Construction:
The construction of this machine is extremely sturdy and the design is
aesthetically pleasing. Having the coil inserter near the front of the
machine is very handy for inserting purposes (some machines have
inserters on the top). The all metal construction of the machine makes
it ideal for medium volume applications. The only part that could
potentially break with the ECI is the small clear rubber belt that
drives the coil inserter. These cost a couple of dollars and are simple
to replace.
Recommendation:
With a medium duty manual punch and an high quality electric coil
inserter I wouldn't hesitate to recommend the CoilMac ECI. If you step
too far below this machine you will lose the coil inserter, all metal
construction and durability. Unless I only needed to bind a few
documents per week I wouldn't want to give up any of these things.
However, if you do a lot of binding, you might want to consider either
a modular system (a separate punch and inserter) or a larger
combination system with an electric punch.
© 2024 Created by PH the vintage. Powered by
You need to be a member of On Feet Nation to add comments!
Join On Feet Nation