Construction waste crusher, the indispensable sand making equipment in the artificial sand production process, occupies an important position in the entire sand production line. Because its production capacity directly determines the output of the production line, it is necessary to make the production line reach a large The improvement of the capacity of construction waste crusher is particularly prominent. Here, the following will be a brief explanation of the factors affecting the capacity of construction waste crushers and the four steps of capacity increase, as follows:
I. Factors affecting the capacity of construction waste crushers
In general, there are many factors affecting the production capacity of construction waste crushers, such as the lithology, hardness, moisture content of the materials, etc. Let us introduce them in detail.
1. Hardness of the material: The harder the material, the more difficult it is to make sand, and the more severe the wear on the sand making equipment. The speed of sand making is slower, of course, the production of sand will decrease;
2. The content of fine powder in the material: the higher the content of fine powder in the material, the greater the impact on the work of the construction waste crusher, because the adhesion of these fine powders will affect the transportation;
3. Viscosity of material: The greater the viscosity of the slurry, the coarser the particle size of the overflow product, the smaller the sedimentation velocity of the ore particles in the slurry, which will cause the sand efficiency of the construction waste to be reduced.
The greater the viscosity of the material, the easier it is to adhere. For materials with high viscosity, they will adhere to the inner wall of the sand making chamber in the construction waste crusher. If it cannot be cleaned in time, the working efficiency of the construction waste crusher will be seriously affected, and the normal operation of the sand making equipment will be severely affected.
4. Humidity of material: When the moisture contained in the material is large, the material is easy to adhere in the construction waste crusher, and it is easy to be blocked during the feeding process, resulting in a reduction in the sand making capacity of the sand making mechanism.
Second, ways to improve the capacity of construction waste crushers
Step: Strictly control the humidity of the material: The construction waste crusher should strictly control the humidity of the material when the material is selected. If the humidity of the selected material is too large, the sunshine or air drying method can be used to reduce the percentage of moisture in the material.
Step 2: Strictly control the sand content in the material: For materials with a high content of fine powder, the sieve should be sieved one time in advance. The fine powder should be filtered out from the material as much as possible to avoid affecting the normal operation of the sand making machine.
The third step: strictly control the hardness of the material: the greater the hardness, the more difficult the construction waste crusher works, and the more serious the wear on the construction waste crusher. The construction waste crusher has low production capacity, so this requires us to be cautious in the choice of materials.
Step 4: Strengthen the routine maintenance of the construction waste crusher.