I'll need to go into the grinder take it down we distributor there we are there's our point it was that nice news you didn't see the point we've got for you to go into the other piece of animal oh when we've finished it so for the stick at the moment that's all we need to do but we'll base the whistle on the end of this flood you let that I've got and I wait for I'm playing these but Dynamo Walking Cane we haven't got to have all the holes down it we don't have to have a hole in that end as long as we've got this part this is this is the working part here so what I've got to do is drill a hole down through the antler just far enough as a chamber and then we've got to shape this part and cut this out and down and file or cut a chisel a an angle here for the air to come across I've just drawn the chamber down first Farmar what I need to do next is fill this up again with a piece of wood that has a slight piece gap across the top the ideal pieces of one I've just chopped off so if I take this and shape it I should were to fit that in only to about there it needs to go just don't about there look like that what I'll do is again got my knife here in a minute.

We'll just shake this up we'll just trim off the end first ago now I need to use my knife just to trim off the top part so that the whistle will actually lower across the top test that in there then see what it's like that's on the way look you start your open all that's about right there that's about the right size for the hole in the opening now we can film this piece off here right so now I've got it right and I've got it like this I took that way up this piece is going to have to go into there like that and I think I'm even gonna need any glue in it but Walking Cane for Women I might just put a bit more see but I want to make sure it doesn't block up the hall I put push it in I took just enough for the hole I take a little bit more off that this is now completed you can see.

I've actually taken another piece of form I made a second whistle here and glued that into the end much easier for me to do that and adjust it than it was on this one but that's up to you you can use the end of the actual stick to make of this law you can do it that we're now going to round this off and then you'll see what it will indeed whistle Shh there we go right now I need to drill down into here get on straight because I'm going to make sure that's where the screw goes in that is already in my stick here see it there and that is going to just screw onto here when it's ready to glue and then I've got to do is just like that you see show you so.