download crack for thebat 3.x

Name: download crack for thebat 3.x
Category: Soft
Published: arglouconpres1974
Language: English

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Created Size Downloads 2016-10-01 77.03 KB 1160 Taranis with Ikon Version:Final.
Created Size Downloads 2016-12-26 77.03 KB 2211 Blade 180 CFX.
Configuration designed to work with DSMX module (example tested with ORX DSM2/DSMX Module with push button selectable protocols) in 22ms DSMX (two flashes) mode. All flight modes implemented (stability, 3D/acro, safe) with throttle and pitch curves approximating recommended settings. Expo/Rates for Aileron, Elevator, Rudder set to switch.
Setup for Blade 270 Fusion with an Orange module.
T-Rex 450 SE with Futaba 401 gyro. CCPM configured helicopter.
S2: Tail Gain Adjustment.
SE - Mode SF - Thottle hold SG - DR/Expo (low/medium/high) SH - Rescue.
I've made a profile for my XK 110 and taranis with multimodule.
Timer for total flight time and battery.
There are 3 modes: Normal, Idle 70% and Idle 100%.
Taranis X9E with X6R connected by SBUS to V-Stabi 5.2.
Created Size Downloads 2016-02-01 77.03 KB 1321 Thunder Tiger Raptor 30 v1.
Thunder Tiger Raptor 30 v1 with OS .37 engine and Futaba GY401 gyro.
This is a Flybarred Trex 500 for Taranis running OpneTX 2.2.
Created Size Downloads 2017-10-15 955 B 639 Trex-500 Flybar OpenTX 2.2 Taranis Version:OpenTX 2.2.
SC: High, Middle, Low Rates.
Trex 450 heli with flymentor.
Created Size Downloads 2015-11-11 77.03 KB 2630 Heli Normal Swash Gyro Governor Version:2.1.3.
Configured as per Blade 180CFX manual with AUX2 programming.

I've been flying my Gaui X3 with this configuration for quite some time now and it flies great.
Created Size Downloads 2014-08-05 77.03 KB 1664 T-rex 450 w Flymentor and sounds Version:3.
Created Size Downloads 2014-08-05 77.03 KB 1587 Gaui X3 with BD3SX.
Created Size Downloads 2015-11-06 77.03 KB 1814 Blade 130X Version:1.0.
Created Size Downloads 2014-05-01 5.81 MB 1341 Align T-Rex 500 ESP with Flybar.
PPM tuned for Orange PPM module.
I use OpenTX 2.2.0, be aware.
Basic setup (Normal + Idle-Up1 + Idle-Up2) for Horizon Hobby Blade 130X based on the default values described in the user guide. Read the detailed description for the switch description. This is an OpenTX 2.1 version.
Created Size Downloads 2015-12-23 77.03 KB 1801 T-Rex600ProFBLv2 (V-Stabi, SBus, Taranis X9E) Version:1.
I included my soundfiles for FM postionmode FM balance mode FM off. as well as the other files i use for flightmode normal flightmode idle up and so on.
Curves copied from original manual.
Powered by jdownloads.
SH: Captain Rescue.
P.D. Voices in Spanish.
Created Size Downloads 2015-11-29 190.38 KB 1504 Helicopter FBL template Version:V0.75.
LS: Volume Control.
This is a base working CCPM eepe for the Trex 500 Electric. You may have to adjust your curves but it is a good base.
Created Size Downloads 2014-05-11 1.16 MB 2213 Hurricane.
SBUS (Futaba Channel Order) with BD3SX.
AMP and Voltage telemetry sensors.
Used with home made dsm2/x module.
Helicopter template for FBL helicopter.
T-Rex 450L setup Futaba SBUS style, BRAIN / ICON Flybarless System.
Helicopter with normal Swash plate. Throttle Cut - Flight Mode Throttle Hold with Throttle hold Delay - Flight Mode Normal (When 15% of stick governor enable at 1600 rpm) - Flight Mode Idle Up1 (governor enable at 1800 rpm)- Flight Mode Idle Up2 (governor enable at 1900 rpm). Governor On Off switch - Gyro On Off switch (Normal - AVCS). Fail safe all return to center.
Created Size Downloads 2017-01-31 77.03 KB 1452 XK 110 / V977 Taranis Multimodule Version:1.0.0.
4 Flightmode, Throttle hold, Normal and idleup 1 and 2.
Created Size Downloads 2016-12-26 77.03 KB 1364 T-Rex 450 SE.
Created Size Downloads 2015-12-06 76.03 KB 2345 Blade Nano CPS Version:2.1.6.
Model for Blade nano cpx, with timer, idle up and throttle hold.
Setup T-Rex 550L Futaba SBUS style, setup with Brain / Icon Flybarless system.
Miniature Aircraft X-Cell Helicopter with OS .46, Futaba GY401 Gyro.
Hurricane Helicopter settings. FM phases (Hover, Trans and Acro)(SE), with throttle stick block (SF) and Cut glow engine with full closed carburetor (SH). Gyro connect and disconnect (SC).
Created Size Downloads 2019-01-23 76.01 KB 470 Synergy E5 (08.2014)
Created Size Downloads 2017-09-25 1.13 KB 1621 Blade 180CFX Version:2.2.
Throttle based timer - 5 Mins.
SE / SB: Flight Modes (4 Flight Modes + Normal.
Created Size Downloads 2017-12-31 917 B 840 Blade 270 Version:1.0.
S2: Tail Gain Adjustment.
Specifically for 200SRX (fixed pitch)
AMP and Voltage telemetry sensors.
Created Size Downloads 2015-11-30 190.94 KB 2210 T-Rex 550L Dominator.
Created Size Downloads 2015-11-28 76.03 KB 2292 Trex 500 CCPM Base Version:OpenTX 2.1.5.
LS: Volume Control.
SE / SB: Flight Modes (4 Flight Modes + Normal.
I'm putting this out there hopefully to help. It is my eePe file for my Taranis Plus, X8R and Ikon setup. I am also using version 2.1.7. I have not flight tested yet due to waiting for parts. But a bench test showed everything working.
Trippel rate, shared switch for Travel limit and Expo for Aileron, Elevator and Rudder.
SH: Captain Rescue.
Created Size Downloads 2016-10-01 77.03 KB 1373 Miniature Aircraft X-Cell 46.
Created Size Downloads 2015-12-06 76.03 KB 1889 T-Rex 450L Dominator.
Basic setup (Normal + Idle-Up1) for T-Rex 500 ESP with Flybar. Futaba Setup.
OpenTX 2.2 model for Blade 180CFX.
Voice Alerts on all mode changes.
Created Size Downloads 2016-01-25 77.03 KB 1740 Heli Tracker.eepe Version:6.
Created Size Downloads 2018-04-12 828 B 477 200SRX Version:v1.
SBUS (Futaba Channel Order) with BD3SX.
SC: High, Middle, Low Rates.
http://soyrasapug1981.eklablog.com/a733-datasheet-download-microsof...