Toner drum is an important component of laser printer, and the toner drum in laser printer is an organic silicon photo conductor, so the toner is a problem of working fatigue. When it's working long and the output is very large, you need to pause for a while after work and then continue to export. Because of this, it is necessary to be very careful about the maintenance of toner. Common knowledge about toner cartridges is as follows:

1.When replacing the toner like tn760, pay attention to the cleaning of waste powder in the tn760 cartridge in the bin, so as to not affect the output effect. This is because if the waste powder accumulation is too much, can appear the phenomenon of leakage powder, if was not ruled out this kind of situation and continue to use, after a period of time, can appear serious bottom ash powder leakage. The reason for this kind of failure is that the waste powder can't get into the waste powder, and the waste powder in the waste powder can be squeezed out. Because waste powder contains powder, fiber and other dirt, rough, the stolen goods if and drum unit friction for a long time, will be more and more tight, pressure is more and more big, the final grinding coating on the surface of the drum, drum unit is damaged. So it's not going to happen if you clean up the waste bin immediately when you find out the output leaks.

2. Be careful to avoid light cleaning while cleaning the brother toner cartridges.

3. If you need to clean the surface of the toner cartridges, use the nonfat cotton to dip into the toner cartridges. To wipe the time to take the spiral circle type of method, polished immediately use the degreasing cotton to clean the cleaner.

4. When filling the toner drum, only use the gauze with talcum powder to gently pat a layer of talcum powder on the surface of the toner cartridges, and the toner cartridges can be used easily.

5. When cleaning the toner cartridges, carefully remove the toner cartridges and wipe the surface of the toner cartridges with nonfat cotton. However, be careful not to use too much force in the process of wiping, in case you scratch the toner surface.
Above is the maintenance common sense of toner drum, if have insufficient, welcome to add!