Atten

ST-100 100W Soldering Station

● Smart recognition of working or non-working status.
● Automatic standby, shutdown with smart time setting.
● High quality silver alloy heater to achieve quicker heating-up
● Temperature locking.
● Beep alarm function available.
● Temperature read out in ℃ and ℉
● MCU controlled temperature calibration.
● Simulate bar indicating heating up status.
● User-friendly menu enables system setting easier.
● Separate iron stand to save room and to make easier deposit.
● New design with LCD display screen making control visualization.
● Buttons(1,2,3) for pre-setting or switching frequently used temperature.
● Low-voltage heater separated from power supply to keep soldering work safer.
● Soldering tip designed separate from heater and using
● Exchangeable AT800 series to save use-cost.

Specifications: Package list: Standard Packing:
Voltage: AC (100V/110V/120V||220V/230V/240V) 50/60Hz(Optional) Main Unit: 1 Unit Inner box: 31.5x27x15.2(cm)
Power：100W Handle set : 1 PCS N.W.: 2.68kg
Heater voltage：24VAC Iron stand: 1 PCS G.W.: 2.95kg
Temperature range：150~480°C AC cord: 1 PCS Carton: 6 PCS/Carton
Temperature offset range：±50°C Manual: 1 Copy Size: 55.5x33x48(cm)
Temperature stability：±2°C (in still air, no load) Cleaning sponge: 1 PCS N.W.: 17.9kg
Temperature adjustment：5 digits (Default)/1 digit (Fine-tuning) G.W.: 19.0kg
Automatic stand-by time：1-120 minutes （Adjustable）
Automatic shutdown time：1-120 minutes （Adjustable）
Heater：100W Silver alloy heater
Tip-to-ground impedance：< 2Ω
Tip-to-ground voltage：< 2mV

http://www.atten.com/products/atten-st-100-100w-soldering-station.html