Welcome to
On Feet Nation
High performance pluggable four-core heating element;
Temperature read out in ℃ and ℉
On/Off switch on the right side of the unit.
MCU controlled temperature calibration.
Simulate bar indicating heating up status.
LCD display screen making control visualization.
User-friendly menu enables system setting easier.
Separate iron stand to save room and to make easier deposit.
Buttons(1,2,3) for pre-setting or switching frequently used temperature.
Low-voltage heater separated from power supply to keep soldering work safer.
Soldering tip designed separate from heater and using exchangeable 900M series to save use-cost.
Specifications: Packing list: Standard Packing:
Voltage: AC (100V/110V/120V||220V/230V/240V) 50/60Hz(Optional) Main Unit: 1 Unit Inner box: 25x21x13.4(cm)
Power:80W Handle set : 1 PCS N.W.: 1.74kg
Heater Voltage:26VAC Iron stand: 1 PCS G.W.: 2.0kg
Temperature range:150~480°C AC cord: 1 PCS Carton: 12 PCS/Carton
Temperature offset range:±50°C Manual: 1 Copy Size: 51.5x44x43(cm)
Temperature stability:±2°C (in still air, no load) Cleaning sponge: 1 PCS N.W.: 24.0kg
Setting method:adjust by buttons G.W.: 25.1kg
Temperature calibration:digital
Heater:80W High quality pluggable four-core heating element
Tip-to-ground impedance:< 2Ω
Tip-to-ground voltage:< 2mV
source from:http://www.atten.com/products/at980e-80w-digital-lead-free-solderin...
http://www.atten.com/products/at980e-80w-digital-lead-free-solderin...
© 2024 Created by PH the vintage.
Powered by
You need to be a member of On Feet Nation to add comments!
Join On Feet Nation