Smart recognition of working or non-working status
Automatic standby, shutdown with smart time setting
High frequency eddy heating element, fast heating-up, thermal recovery and high thermal capacity.
Temperature locking.
Beep alarm function available.
Temperature read out in ℃ and ℉
MCU controlled temperature calibration.
Simulate bar indicating heating up status.
User-friendly menu enables system setting easier.
Separate iron stand to save room and to make easier deposit.
New design with LCD display screen making control visualization.soldering iron
Buttons (1, 2, and 3) for pre-setting or switching frequently used temperature.
Temperature up to 500℃ for high thermal capacity required circumstances.
Low-voltage heater separated from power supply to keep soldering work safer.
Soldering tip designed separate from heater and using exchangeable AT500 series to save use-cost.

Specifications: Packing list: Standard Packing:
Voltage: AC (100V/110V/120V||220V/230V/240V) 50/60Hz(Optional) Main Unit: 1 Unit Inner box: 25.5x21x13.5(cm)
Power：150W Handle set : 1 PCS N.W.: 1.7kg
Heater Voltage：28VAC Iron stand: 1 PCS G.W: 1.95kg
Temperature range：150~500°C AC cord: 1 PCS Carton: 8 PCS/Carton
Temperature offset range：±50°C Manual: 1 Copy Size: 53x43x28.2(cm)
Temperature stability：±2°C (in still air, no load) Cleaning sponge: 1 PCS N.W.: 15.6kg
Standby time：10 mins（for standby function activated and the duration is fixed） G.W: 1.67kg
Setting method：adjust by buttons
Temperature calibration：digital
Heater：150W High frequency eddy current heating element
Tip-to-ground impedance：< 2Ω
Tip-to-ground voltage：< 2mV