Market Highlights
The liquid crystal polymer films and laminates market Report is estimated to be valued at USD 115,912.0 thousand in 2017 and expected to exhibit a CAGR of 4.26% during the forecast period.
The increasing application of LCP films & laminates in the electrical and electronics industry and the expanding automotive and transportation industry are factors expected to fuel the growth of the global market during the forecast period. However, low weld…
Continue
Added by Smith on September 28, 2022 at 2:45am —
No Comments
Market Highlights
The global ductile iron pipes market has witnessed a surge in growth rates in the past few years. This is attributed to its durability, cost-effectiveness, and heat & pressure resistance. These pipes are manufactured according to the most rigorous and conservative standards of the industry, which makes them highly durable. The installation of ductile pipes is very cost-effective and have a long-term cost advantage because of its properties, which, in turn,…
Continue
Added by Smith on September 28, 2022 at 2:35am —
No Comments
The global butyl acetate market share has been segmented on the basis of application, end-use industry, and region.
By application, the global Butyl Acetate Market Trend has been classified into paints & coatings, pharmaceutical, perfumes, flavors, printing inks, and others. The use of butyl acetate in the production of paints & coatings is increasing as it offers waterproof coatings as well as acts as a solvent for the preparation of paints and coatings. This has driven its…
Continue
Added by Smith on September 28, 2022 at 2:28am —
No Comments
Market Overview
Coalescing agents act as a temporary plasticizer for the polymer particle. They play an important role in optimizing the film formation to ensure a smooth and uniform surface finish. The growing adoption of industrial adhesives & sealants in the automotive industry owing to reduce the overall weight of the vehicles and curb CO2 emissions is expected to drive the growth of the global coalescing agents market during the forecast period. In addition, adhesives are…
Continue
Added by Smith on September 28, 2022 at 2:17am —
No Comments
Overview
The Global Prestressed Concrete Market Trend is expected to gain an unprecedented value of USD 29,922.3 Million by 2025, with 5.70% CAGR during the forecast period (2019–2025). Market Research Future (MRFR) in their report envelops segmentations and drivers for a better glimpse of the market in the coming years. Prestressed concrete is a form of concrete used in construction. It is durable, reliable, and strong. Prestressed concrete helps construct crack-free structural…
Continue
Added by Smith on September 28, 2022 at 2:12am —
No Comments
Market Overview
The global Nonwoven Fabrics Market Trend during the forecast period 2018-2027, will register growth at a CAGR of 7%. The market for nonwoven fabrics is set to reach US$69.18 billion by 2027. As per Market analysts, the global market is anticipated to witness growth owing to the factors such as growing applications in the healthcare sector as well as growing adoption from the automotive sector. However, Nonwoven Fabrics Market will face challenges and restraints due to…
Continue
Added by Smith on September 28, 2022 at 2:07am —
No Comments
Market Segmentation
The global silicone market revenue has been segmented by type, application, end-use industry and region.
Based on types, the market has been divided into silicone elastomers, silicone gels, silicone fluids, silicone resins, and others. Silicone elastomers are sub-divided into high temperature vulcanized (HTV), liquid silicone rubber (LSR), and room temperature vulcanized (RTV). The silicone fluids segment is further divided into straight silicone and…
Continue
Added by Smith on September 28, 2022 at 1:50am —
No Comments
Market Highlights
The global fencing market is anticipated to witness sustainable growth throughout the forecast period. Increased consumption of fencing in Asia-Pacific, the growing construction industry, investment in material R&D, and supportive government regulations & initiatives for construction is expected to drive the demand for fencing in residential spaces. However, fluctuation in raw material prices is expected to hinder the growth of the market.
North…
Continue
Added by Smith on September 28, 2022 at 1:46am —
No Comments
Market Overview
The global curing agent market trend is expected to witness a significant growth during the forecast period owing to the wide scope of application such as coatings, composites, adhesives, and others. The increasing demand of curing agents in coatings for automotive, electrical & electronics, building & construction, and marine is expected to drive the global market. With the growth of these industries, the demand for curing agent is likely to reach its peak…
Continue
Added by Smith on September 28, 2022 at 1:40am —
No Comments
Market Segmentation
The global spray polyurethane foam market has been segmented by type, application, and region.
On the basis of type, the market has been segmented into open cell spray polyurethane foam (light density spray foam), closed cell Spray Polyurethane Foam Market, one component foam, and others. Open cell spray polyurethane foam segment accounted for the largest share of the global spray polyurethane foam market in 2017 and is expected to register a healthy…
Continue
Added by Smith on September 28, 2022 at 1:26am —
No Comments
Market Overview
The manufactured fibers which mainly composed of steel, metal-coated plastic, plastic-coated steel, or a steel core. The steel fibers are generally produced from the steel alone or in combination with other substances. The filaments below 100 µm in diameter are considered as fibers. The product exhibits substantial physical and electrical properties such as high corrosion and thermal resistance good electric and heat conductivity, and excellent Electromagnetic…
Continue
Added by Smith on September 23, 2022 at 4:23am —
No Comments
Overview:
The global ceramic fiber market overview has been segmented by type, product form, end-use industry, and region.
By type, the global Ceramic Fiber Market Report has been divided into refractory ceramic fiber, alkaline earth silicone, and others. The refractory ceramic fiber type accounted for the largest market share in 2017 owing to its high insulating property. However, this type has been classified as possibly carcinogenic to humans by the Agency for Research…
Continue
Added by Smith on September 23, 2022 at 3:29am —
No Comments
Overview
Polyvinyl alcohol (PVA) fibers are used in many sectors, especially in the construction sector. A new report on the global polyvinyl alcohol fiber market, published by Market Research Future (MRFR), predicts that this market could figure a proliferation at 3.39% CAGR between 2018 and 2023. In terms of value, the market can be worth USD 409.14 Mn by the end of the forecast period.
The biggest market drivers for the global polyvinyl alcohol fiber market Report…
Continue
Added by Smith on September 23, 2022 at 3:24am —
No Comments
Market Overview:
The global artificial turf market overview has been segmented by raw material, installation type, infill material, application, and region.
Based on raw material, the global artificial turf market has been segmented into polyethylene, polypropylene, nylon, and others. Among them, the polyethylene segment held the largest market share in 2017 due to its widescale preference for technically demanding sports applications on account of its softness, and…
Continue
Added by Smith on September 23, 2022 at 3:00am —
No Comments
Market Highlights:
The global facades market Trend is anticipated to witness sustainable growth throughout the forecast period. Increased consumption of facades in Asia-Pacific, the growing construction industry, investment in material R&D, and supportive government regulations & initiatives is expected to drive the demand for facades. However, fluctuation in raw material prices and unavailability of skilled labor, is expected to hinder the growth of the…
Continue
Added by Smith on September 23, 2022 at 2:55am —
No Comments
Market Overview:
Lubricants development enables the machineries to run efficiently. Compressor oil is used to reduce heat and cool down the compressors. It improves the machinery performance and offer anti-rust properties. The excellent oxidation stability and low carbon forming benefits in saving the maintenance cost and downtime.
Competitive Analysis:
Some of the prominent players in the Global Compressor Oil Market Trend are Exxonmobil Corporation (US),…
Continue
Added by Smith on September 23, 2022 at 2:51am —
No Comments
Market Overview:
The global Hybrid Composites Market Trend has been segmented by fiber type, resin type, end-use industry, and region.
By fiber type, the global hybrid composites market opportunity has been segmented into carbon/glass, carbon/aramid, metal/plastic, wood/plastic, HMPP/carbon, UHMWPE/carbon, and others. Although carbon-aramid reinforced epoxy offers high strength and impact resistance, the glass-carbon reinforced epoxy is leading the market owing to its low…
Continue
Added by Smith on September 23, 2022 at 2:32am —
No Comments
Global 3D Printing Plastics Market – Overview
The versatility of plastic as a printing medium has boosted its application rate in the 3D Printing Market Trend. The analysis revealed by MRFR states that the market will expand at a CAGR of 23.3% while achieving revenues worth USD 1,700 Million by the end of the forecast period. The increasing popularity of 3D printing technology in end-use industries such as automotive, science and industrial sectors is expected to modify the demand…
Continue
Added by Smith on September 23, 2022 at 2:25am —
No Comments
Butadiene is produced as a byproduct during the steam cracking process of ethylene and propylene. It is a highly reactive colorless gas, considered as a vital feedstock for manufacturing various chemicals and materials in automotive, paints, and textile end-use industries.
Based on product derivatives, the global butadiene derivatives market has been divided into styrene butadiene rubber (SBR), polybutadiene rubber (PBR), acrylonitrile butadiene styrene (ABS), styrene butadiene…
Continue
Added by Smith on September 23, 2022 at 2:13am —
No Comments
Market Dynamics
Market Research Future (MRFR) expects the construction lasers market 2020 to gain substantial grounds at an exhilarating pace between 2018 and 2023 (evaluation period).
Market Drivers and Primary Barriers
COVID-19 has had a profound impact on the construction industry; with a majority of construction projects getting delayed and are expected to take time to resume. This significant disruption in the industry has been caused by the dramatic…
Continue
Added by Smith on September 23, 2022 at 1:59am —
No Comments