Welcome to
On Feet Nation
Posted by Raymond on August 17, 2024 at 4:16pm 0 Comments 0 Likes
Posted by Brenda on August 17, 2024 at 4:16pm 0 Comments 0 Likes
Posted by Katharine on August 17, 2024 at 4:16pm 0 Comments 0 Likes
Waste heat is generated from the exhausts of fume incinerators, combustion engines, glass melting furnaces, and cooling water from furnaces and convective, conductive, and radiation heat losses from combustion engines and cement kilns. Waste heat is also generated from process off-gases. Heat losses in several industrial processes can be curtailed by using waste heat recovery systems. Such systems involve the capturing and reuse of waste heat for combustion air preheating, steam generation,…
ContinueAdded by Aryan Kumar on September 30, 2021 at 7:24am — No Comments
Solar control glass refers to the glass which consists of a special coating that reflects a major portion of sunlight, thereby, reducing the heat entering into a building. Installation of such glass, therefore, helps in cooling and brightening indoor spaces. Additionally, the usage of such glasses can also reduce the need for blinds and air-conditioning systems in newly constructed green buildings. Thus, the surging use of glass in modern buildings is resulting in the large-scale…
ContinueAdded by Aryan Kumar on September 29, 2021 at 9:01am — No Comments
Biocidal products refer to active substances or compositions that are used to deter, render, destroy harmless microorganisms, or exert a controlling effect on hazardous organisms, by chemical or biological means. Based on their properties, such products can act as pesticides, disinfectants, or preservatives. There are two types of biocides– oxidizing and nonoxidizing. Oxidizing biocides, such as chlorine, sodium bromide, and peracetic acid, attack microorganisms by oxidizing the cell…
ContinueAdded by Aryan Kumar on September 28, 2021 at 7:28am — No Comments
Fire-resistant fabrics, namely fire-retardant treated (FRT) and inherent, are used as flame-retardant substances due to the chemical treatment of these fabrics. FRT fabrics are converted into fire-resistant materials by using fire-resistant chemicals. These fabrics are widely used in the electrical, oil and gas, and electrical industries, which are excessively prone to heat and risk of fire. These fabrics are primarily used in law enforcement service uniforms and fire-fighting uniforms.…
ContinueAdded by Aryan Kumar on September 24, 2021 at 3:12am — No Comments
Methylene chloride, an organic compound, is a volatile liquid with a moderately sweet aroma. The chemical formula of the organic compound is CH2Cl2. The compound is also known as dichloromethane (DCM) and is widely used as a solvent in paint removers. Additionally, DCM is also used in aerosol formulations, which are required in the production of pharmaceuticals, as an ethane foam blowing agent, and as a degreasing agent in the manufacturing of electronics. Furthermore, methylene chloride is…
ContinueAdded by Aryan Kumar on September 23, 2021 at 3:19am — No Comments
Thermal sprays are widely used in the medical devices, oil and gas, aerospace, automotive, electronics, energy and power, rubber, mining, industrial manufacturing, textile, and food processing industries. According to P&S Intelligence, the aerospace industry used the highest quantity of thermal spray materials in the past, especially in the coatings applied on turbo-machinery, such as rotor-path linings, engine components, compressor seals, high-pressure turbine seals, airframes, and oil…
ContinueAdded by Aryan Kumar on September 21, 2021 at 3:11am — No Comments
Dyestuffs refer to water-soluble inexpensive materials that are used to impart color to fabrics. These substances comprise of pigments, azo acids, dyes, and intermediates. Dyestuff producers constantly work to improve the properties of such substances to meet the demands of new kinds of fabrics. In recent years, the textile industry has been increasingly focusing on developing advanced dyeing machinery to overcome the environmental issues caused by the existing dyes. These improvements are a…
ContinueAdded by Aryan Kumar on September 20, 2021 at 10:13am — No Comments
The increasing incidence of diseases and health issues, due to the consumption of toxic food items and beverages, is pushing up the requirement for polyvinylidene difluoride (PVDF) membranes across the world. This is because this membrane assists in filtering out the toxic materials present in the food items and beverages. Moreover, these membranes are extensively used for removing spoilage organisms and contaminants from foods and beverages and for brewing beer.
Additionally, these…
ContinueAdded by Aryan Kumar on September 20, 2021 at 4:07am — No Comments
The expansion of the textile industry is positively impacting the sales of plastisols across the world. Screen printing is rapidly becoming the most sought-after option for printing fabrics. Plastic inks are extensively used in the inking and coating of textiles, because of their high cost-effectiveness, excellent performance, and opaqueness. Moreover, the mushrooming requirement for printed textiles such as jeans, printed tees, jackets, tote bags, and various other apparels is boosting the…
ContinueAdded by Aryan Kumar on September 17, 2021 at 12:21am — No Comments
Every year, more than 180,000 people die of burns, according to the estimates of the World Health Organization (WHO). Moreover, as per the agency, “…the vast majority occur in low- and middle-income countries.”, which is attributed to the lax or non-existent fire safety standards in many developing and under-developed countries. In contrast, North America and European countries have stringent regulations regarding fire safety, which help avert numerous serious disasters each year.
As…
ContinueAdded by Aryan Kumar on September 16, 2021 at 4:56am — No Comments
Cut size uncoated freesheet paper refers to a type of graphic paper that is manufactured by using about 10% mechanical pulp and 90% chemical pulp. This paper is available in rectangular sheets in three sizes— 210 mm*297 mm (A4), 215 mm*345 mm (legal), and 297 mm*420 mm (A3). A4-sized uncoated freesheet paper is preferred over other types of papers due to its higher compatibility with a variety of printers, such as laser and inkjet printers, and lower cost.…
ContinueAdded by Aryan Kumar on September 15, 2021 at 12:03am — No Comments
Coding and marking requirements in the manufacturing and processing sector of Indonesia were traditionally met with the use of analog technologies. However, in recent years, manufacturers here have shifted to digital coding and marking solutions owing to the increasing complexities in product packaging. As a result, the country has now shifted toward high-tech, sensitive printers. Now, manual systems are being substituted with continuous inkjet printers for working on product…
ContinueAdded by Aryan Kumar on September 14, 2021 at 7:16am — No Comments
Due to the surging construction activities and the increasing requirement for die casting for manufacturing automotive components, the Indian mold release agents market is exhibiting huge expansion. According to the forecast of the market research company, P&S Intelligence, the market revenue will rise from $114.6 million in 2018 to more than $153.9 million by 2024. Furthermore, the market is expected to progress at a…
ContinueAdded by Aryan Kumar on September 13, 2021 at 2:26am — No Comments
The mushrooming use of chloromethanes as a raw material for producing industrial solvents is driving its demand across the world. Large quantities of this compound are processed for producing dimethyldichlorosilane and various associated organosilicon compounds. Dimethyldichlorosilane basically serves as a precursor to the silicones that are heavily used for producing medicines, sealants, adhesives, lubricants, and cooking utensils and also in electrical and thermal insulation. In addition…
ContinueAdded by Aryan Kumar on September 10, 2021 at 7:03am — No Comments
Decorative coatings are applied on exterior and interior surfaces for enhancing the aesthetic appeal of the structure and also for providing a protective layer to the surface in order to protect it against fading, corrosion, moisture, bacteria, and ultraviolet (UV) radiation. These coatings posses various beneficial characteristics such as anti-slip, anti-microbial, fire-resistant, and anti-graffiti properties and are available in different colors for meeting the requirement of multiple…
ContinueAdded by Aryan Kumar on September 9, 2021 at 6:25am — No Comments
The cosmetic industry is increasingly using bismuth nitrate in lipsticks, eye shadows, nail polishes, and hair sprays, due to the surging public awareness regarding this compound and the ability of this compound to be used as a white pigment source. With the rising consciousness about personal appearance, the demand for cosmetic products will surge at a rapid pace. This will, therefore, accelerate the…
ContinueAdded by Aryan Kumar on September 8, 2021 at 5:41am — No Comments
The global corrugated boxes market generated a revenue of $180.9 billion in 2019, and it is predicted to advance at a CAGR of 4.3% from 2020 to 2030. Furthermore, the market will reach a value of $284.6 billion by 2030, as per the forecast of the market research firm, P&S Intelligence. The market is being driven by the growing requirement for convenient and lightweight…
ContinueAdded by Aryan Kumar on September 7, 2021 at 10:20am — No Comments
The steel industry uses a large volume of graphite due to its high corrosion resistance, strength, and durability. In recent years, the production of steel has significantly surged due to the increasing requirement for steel products in the residential, automotive, construction, and oil and gas industries. Thus, the spurring demand for steel from these end-use industries will accelerate the…
ContinueAdded by Aryan Kumar on September 7, 2021 at 8:17am — No Comments
In recent years, the demand for renewable energy such as wind and solar energy has increased considerably, primarily because of the rapid degradation of the environment due to the extensive usage of non-renewable resources such as fossil fuels for energy production. Additionally, the limited availability of fossil fuels across the world is making many private organizations and governments focus heavily on clean energy sources for power generation. Moreover, wind energy producers are focusing…
ContinueAdded by Aryan Kumar on September 2, 2021 at 8:01am — No Comments
For any mechanized process, energy is needed, and for all non-engine objects, the energy comes from electricity. Thus, with the world’s population set to reach 10.9 billion by 2100 from 7.7 billion in 2019, as per the World Population Prospects 2019 report of the United Nations (UN), the demand for electricity is going to keep burgeoning. There is only one problem, especially in developing countries: electricity production is already insufficient to meet the needs of the present population,…
ContinueAdded by Aryan Kumar on September 2, 2021 at 3:25am — No Comments
© 2024 Created by PH the vintage.
Powered by