Welcome to
On Feet Nation
1. Accurate workpiece size, poor surface finish
Fault cause: the cutter tip is damaged and not sharp; The machine resonates and is not placed smoothly; The machine tool has crawling phenomenon; The processing is not good.
Solution: after the tool wear or damage is not sharp, then re-sharpen the knife or choose a better tool on the knife; The machine produces resonance or the position is not stable, adjusts the level, lays the foundation, the fixed is stable; The reason for…
ContinueAdded by Shaneyboy on September 27, 2020 at 10:00pm — No Comments
© 2024 Created by PH the vintage. Powered by